Light an LED in 60 seconds

Build · 3 min

Let's make a light come on. A 9 V battery is already plugged into the breadboard.

Copy the faint outlines: a wire from the red + rail into the board, and a resistor with one leg in the same column as the wire's end.

Now the LED. Its long leg goes in the same column as the resistor's other leg, and its short leg in the next column along.

Last, a wire from the LED's short leg back to the black − rail. That closes the loop, and makes a circuit.

Press Run at the top of the simulator.

What if the resistor were bigger? Click the resistor on the board to select it, and change its value to 1 kΩ (1000 Ω). Keep an eye on the LED.

That's your first circuit. Every circuit is a loop like this one: from the battery's +, through the parts, and back to its −.

On a real bench you'd build exactly this with real parts: a 9 V battery and clip, a red LED, and a 1 kΩ resistor (stripes brown, black, red) or a 470 Ω one (yellow, violet, brown).

Next, how to move around the bench.