Delta-wye conversion
Here is a bridge with a resistor, R5, across its middle instead of a meter. What resistance does the battery see?
Try to reduce it. Are R1 and R3 in series? In parallel?
- Neither: no two resistors here are simply in series or in parallel
- In series
- In parallel
Delta and wye
R1, R3 and R5 form a triangle between three nodes: a delta (Δ), also drawn as a Π. Any delta can be swapped for a wye (Y), three resistors from the same three nodes to one new centre point, also drawn as a T, and nothing outside can tell the difference.
Each wye resistor is the product of the two delta resistors at its node, over the sum of all three:
A delta of three 150 Ω resistors: what is each resistor of its wye?
Answer in Ω.
Now an uneven delta: Rab = 40 Ω, Rac = 30 Ω, Rbc = 100 Ω. What is Ra, the wye resistor at terminal A?
Answer in Ω.
Network 1. Back to the bridge. Convert its top delta (R1, R3, R5) into a wye. Then the network falls apart into series and parallel: the wye's top resistor, then two paths in parallel, each a wye resistor in series with R2 or R4.
What resistance does the battery see?
Answer in Ω.
Network 2. Another bridge. How much current does the 9 V battery supply?
Answer in mA.
When would you not need a delta-wye conversion for a bridge like this?
- When it's balanced: R5 then carries no current and can be taken out
- When R5 is the biggest resistor
- Never: a bridge always needs it
Delta-wye conversion:
- three resistors in a triangle (Δ, or Π) can be swapped for three in a star (Y, or T) between the same nodes;
- each wye resistor = the two delta resistors at its node, multiplied, over the sum of all three; equal deltas become wyes a third the size;
- it unlocks networks like the loaded bridge, where nothing is in series or parallel;
- a balanced bridge doesn't need it: its middle resistor carries nothing.