Mesh analysis

Calculate · 10 min

Nodal analysis made the node voltages the unknowns and used KCL. Mesh analysis turns that round: give each window of the circuit (each mesh) a current that circulates round it, make those loop currents the unknowns, and use Kirchhoff's voltage law.

Call the left loop's current Ia and the right loop's Ib, both clockwise. R1 carries only Ia and R3 only Ib. R2 sits in both loops, so it carries both: going down through it, Ia−Ib.

KVL round each loop, rises on the left and drops on the right:

left:V1=IaR1+(Ia−Ib)R2right:0=IbR3+V2+(Ib−Ia)R2

In the right loop, going clockwise takes you down through V2, from + to −: a drop of V2.

Worked example: V1 = 9 V, V2 = 6 V, R1 = R3 = 1 kΩ, R2 = 2.2 kΩ, the circuit you solved by nodal analysis. In kΩ and mA:

9=3.2Ia−2.2Ib−6=−2.2Ia+3.2Ib

Solving the pair gives Ia = 2.89 mA and Ib = 0.11 mA.

What current flows down through R2?

Answer in mA.

Problem 1. What current does V1 supply? (That's the left loop current, Ia.)

Answer in mA.

Problem 2. What current flows down through R2?

Answer in mA.

Problem 3. One battery and a load. What current flows through the load, RL?

Answer in mA.

Nodal or mesh: which to use? A circuit has 5 nodes (so 4 unknown node voltages, with one as ground) but only 2 meshes.

  • Mesh analysis: two equations instead of four
  • Nodal analysis: it always works
  • It makes no difference

Mesh analysis:

  1. give each mesh a loop current, all clockwise;
  2. go round each loop with KVL: rises = drops, with a shared resistor carrying the difference of its two loop currents;
  3. solve the equations: one per mesh;
  4. each part's current is its loop current, or the difference of two.

Nodal analysis counts nodes; mesh analysis counts windows. Use whichever gives fewer equations.