Batteries and sources
A battery is a voltage source: whatever is connected to it, it keeps the same voltage between its two terminals.
There are two on the bench: a 9 V battery on the near pair of rails, and a 6 V one on the far pair. Nothing joins them yet.
What happens when batteries are joined together? It depends which way round.
Suppose a wire joins the 9 V battery's + to the 6 V battery's −, so the two are end to end, like cells in a torch.
What will the voltage be across the pair, from the 6 V battery's + to the 9 V battery's −?
- 3 V
- 6 V
- 9 V
- 15 V
Try it. Add a wire from the near red + rail to the far black − rail.
Press Run, open the multimeter, and measure across the pair: red probe on the far + rail, black probe on the near − rail.
What does it read?
Answer in V.
Here are the two batteries again, without the wire. Suppose a wire joined the two + terminals this time, so the batteries push against each other.
What would the voltage be between the two − terminals?
- 0 V
- 3 V
- 9 V
- 15 V
Try it. Add a wire from the near red + rail to the far red + rail.
Press Run and measure between the two − rails: red probe on the far − rail, black probe on the near − rail.
Answer in V.
Cells in series
A single AA or AAA cell gives 1.5 V. Battery holders stack them end to end to get more.
A toy needs 6 V. How many 1.5 V cells does its holder take, joined end to end?
- 3
- 4
- 6
- 9
Ideal and real
The batteries in this simulator are ideal voltage sources: they hold their voltage exactly, however much current is drawn.
So if you joined an ideal 9 V source's terminals with a wire of 0.01 Ω, how much current would flow? (Current is voltage divided by resistance, as you'll see properly in the next module.)
Answer in A.
What you've found:
- A battery is a voltage source: it sets the voltage between its terminals.
- End to end (+ to −), voltages add.
- Nose to nose (+ to +), they subtract.
- A real battery sags under load; an ideal one doesn't.
On a real bench only ever stack cells of the same type and age end to end. And never join different batteries + to + and − to −: the stronger one would drive a large current backwards through the weaker one.