Units and prefixes
The numbers in electronics cover a huge range. An LED takes about 0.015 amps; a resistor might be 47,000 ohms; a small capacitor 0.0000001 farads. Nobody writes them like that.
Instead, a prefix in front of the unit stands for a power of a thousand:
| Prefix | Symbol | Means | Times |
|---|---|---|---|
| mega | M | a million | |
| kilo | k | a thousand | |
| (none) | one | ||
| milli | m | a thousandth | |
| micro | µ | a millionth | |
| nano | n | a thousand-millionth |
So 0.015 A is 15 mA, 47,000 Ω is 47 kΩ, and 0.0000001 F is 100 nF.
Match each prefix to what it multiplies by.
Match each of these:
- kilo (k)
- milli (m)
- mega (M)
- micro (µ)
with one of these:
- × 1,000
- ÷ 1,000,000
- ÷ 1,000
- × 1,000,000
Put these currents in order, smallest first.
Put these in order:
- 500 µA
- 150 mA
- 0.5 A
- 2 A
- 2 mA
To go from a prefixed value to the plain unit, multiply by what the prefix means.
An LED carries 25 mA. How many amps is that?
Answer in A.
Going the other way, to a bigger prefix, divide. Between two prefixes, count the steps of a thousand.
A sensor draws 750 µA. How many milliamps is that?
Answer in mA.
Engineering notation means choosing the prefix that leaves a number between 1 and 1,000.
A calculator shows a current of 0.000047 A. Write it with the right prefix.
Answer in A, with a prefix.
That's the whole system: steps of a thousand, with a letter for each.
- M mega, k kilo: big things, mostly resistances.
- m milli, µ micro, n nano: small things, mostly currents and capacitances.
On a real bench the same shorthand is printed on parts and meters. A multimeter showing 4.70 with a small mA beside it means 0.0047 A, a capacitor marked 100n is 100 nF, and on diagrams the prefix often stands in for the decimal point: 4k7 is 4.7 kΩ.