Ohm's law three ways

Calculate · 6 min

Ohm's law ties together the three quantities of a resistor. Know any two and you can find the third.

To findUseIn words
voltageV=I×Rcurrent times resistance
currentI=V/Rvoltage over resistance
resistanceR=V/Ivoltage over current

There is one trap. The formulas work in volts, amps and ohms. A current given in milliamps has to go in as amps (15 mA is 0.015 A), and a resistance in kilohms as ohms (4.7 kΩ is 4700 Ω).

A handy shortcut: volts ÷ kilohms = milliamps. The two thousands cancel.

A 6 V battery is connected across a 220 Ω resistor. What current flows?

Answer in mA.

17 mA flows through a 100 Ω resistor. What is the voltage across it?

Answer in V.

A part has 8 V across it and carries 1 mA. What is its resistance?

Answer in kΩ.

A real one. A sensor's output pin must never carry more than 8 mA. It is connected to a 3.3 V supply through a resistor. What is the smallest resistance that keeps the current within the limit?

Answer in Ω.

That's Ohm's law all three ways. Two habits make it painless:

  • Say what you want first, then pick the form that has it on its own on the left.
  • Watch the prefixes. Either convert everything to volts, amps and ohms, or use volts, milliamps and kilohms together.

On a real bench you'll rarely find a resistor of exactly the value you worked out. They come in standard values, and you take the nearest one that errs on the safe side. The next lesson shows how those values are marked.