Series resistors
So far every circuit has had one resistor. Real circuits have many, and how they are joined decides everything.
The simplest way to join two parts is end to end, so that whatever flows through one has to flow through the other. That is called in series.
Build it: a 1 kΩ resistor from the + rail, then a 2.2 kΩ resistor on from where the first one ends, then a wire back to the − rail.
The circuit is running. Before you look closely: which resistor has more current through it?
- The 1 kΩ: less resistance, so more gets through
- The 2.2 kΩ: it's the bigger one
- Neither: they carry the same current
Watch the dots on the wires and on both resistors. Right now:
| Current | |
|---|---|
| the 1 kΩ resistor | … |
| the 2.2 kΩ resistor | … |
The current is shared equally. The voltage is not.
Open the multimeter and leave it on Volts. Put the red probe in the column where the 1 kΩ resistor meets the wire from +, and the black probe in the column where the two resistors meet.
What is the voltage across the 1 kΩ resistor?
Answer in V.
Now move the probes to either end of the 2.2 kΩ resistor: red where the resistors meet, black at the end that goes to the − rail.
Answer in V.
One resistor in place of two
As far as the battery can tell, the two resistors might as well be a single one. Its value is simply the sum:
What single resistance is this chain equal to?
Answer in kΩ.
Now use Ohm's law on the whole chain. With 9 V across 3.2 kΩ, what current should flow?
Answer in mA.
Measure the current for real. Delete the wire to the − rail, switch the meter to Amps, and put it in the gap: red probe where the wire left the resistor, black probe on the − rail.
What does it read?
Answer in mA.
What if a third resistor were added to the chain, in series with the other two?
- The current would rise: there's another path
- The current would fall: the total resistance is bigger
- The current would stay the same: the battery hasn't changed
Resistors in series:
- carry the same current;
- share the voltage, each in proportion to its resistance, and the shares add up to the supply;
- add up:
On a real bench this is how you make a value you haven't got. No 3.2 kΩ in the box? A 1 kΩ and a 2.2 kΩ in series will do.