Source transformation

Calculate · 10 min

A battery is a voltage source: it holds a fixed voltage across its terminals, and supplies whatever current the circuit takes.

Its mirror image is the current source, drawn as a circle with an arrow. It pushes a fixed current round the circuit, in the direction of its arrow, and its voltage is whatever it takes to do that. Nothing on your bench is exactly one, but plenty of circuits behave like one: a transistor's output, a solar cell, an LED driver. You'll build one in a later course.

This current source pushes 2 mA into its own 1 kΩ resistor and a load. Click the load to change it, and watch the current source's arrow and the currents in the two resistors.

If the load is made bigger, the current the source supplies:

  • Stays at 2 mA: that's what a current source does
  • Falls, like a battery's would
  • Rises

Source transformation

Here is a surprising fact. A battery with a series resistor and a current source with a parallel resistor can be made to behave identically at their two terminals, A and B. No measurement made at A and B could tell them apart.

To match, they must agree on two tests:

TestBattery and series RCurrent source and parallel R
Nothing connected: voltage at A–BV (no current, no drop in R)I×R (all of I goes through R)
A and B joined by a wire: currentV/RI (R is bypassed)

Both hold if the resistors are equal and I=V/R. Two points fix a straight line, and a circuit of resistors and sources always has a straight-line voltage-current relation at its terminals, so agreeing on these two means agreeing on everything.

A battery V with a resistor R in series becomes a current source V/R with the same R in parallel, and back again.

What current source, with a 1 kΩ resistor in parallel, is the same as this 9 V battery with its 1 kΩ series resistor?

Answer in mA.

Problem 1. Convert this battery and series resistor into a current source with a parallel resistor. What is the current source's value?

Answer in mA.

Problem 2. The other way: convert this current source and parallel resistor into a battery with a series resistor. What is the battery's voltage?

Answer in V.

Problem 3. Here conversion does real work. Convert both batteries, each with its series resistor, into current sources. Then everything is in parallel between the top node and the bottom: two current sources, which add, and three resistors, which combine in parallel. The node voltage is the total current times the total resistance.

What is VN?

Answer in V.

Problem 4. A current source with its parallel resistor feeds a load. What current flows through the load?

Answer in mA.

Source transformation:

  • a current source pushes a fixed current; its voltage is whatever that takes;
  • a battery V in series with R and a current source V/R in parallel with R are identical at their terminals;
  • converting lets sources in parallel be added as currents, or sources in series be added as voltages, which can collapse a circuit in a couple of steps.

The idea behind it, that any network looks like one source and one resistor from outside, is the subject of the next three lessons.